ABOUT US

20 years expert in the field of micro-motor with full range of OEM/ODM capability in the field of micro-motor.

INTRODUCTION

Changzhou Vic-Tech Motor Techology Co., Ltd. has been specializing in producing micro motors and accessories since 2011.Our main products:Micro stepper motor,geared motor,underwater thruster and motor drivers and controllers. We have a R & D team with 20 years of experience in motor development, providing customers with design and development custom services. By leveraging our honesty, dependability and quality, Vic-Tech Motor aims to continue as a pioneer in the sales.

Learn more

-

Founded in 2011
-

20 years experience
-+

More than 18 products
-$

More than 500 million

Solution

N20 DC brushed motor w...

Description This is an N20 DC motor with a 1024 gearbox. The N20 DC motor is also a brushed DC motor with a no-load speed of approximately 15,000 RPM for a single motor. When the motor is connected to a gearbox, it runs slower and with more torque. The output shaft of this motor is a D-shaft and the customer can also choose a threaded shaft, if required. Gearboxes are available in the following gear ratios: 10:1,30:1,50:1,100:1,15...

view product
Worm gearbox N20 DC mo...

Description This is a DC worm gear motor with N20 encoder. It is also available without encoder. The outer diameter of the N20 motor is 12mm*10mm, the motor length is 15mm, and the length of the gearbox is 18mm (the gearbox can also hold an N10 motor or an N30 motor). The motor consists of a metal brushed DC motor with a precision metal reducer. The worm gear has small size and large gear ratio. The DC motor technology is relatively m...

view product
DC motor with worm gea...

Description This is a JSX5300 series gearbox motor, which is a DC brushed motor with a worm gear. Its output shaft is a 10 mm diameter D-shaft and the shaft length can be customized. It also has a gearbox that can be converted to a dual-shaft design. The worm gearbox can also be paired with a stepper motor, so customers can choose according to their needs. For continuous working Never give a load more than 25kg.cm For Motor star...

view product
High-speed DC gear mot...

Description This is a N20 DC motor with a 10*12 gearbox. The N20 DC motor is also a brushed DC motor and has a no-load speed of about 15,000 RPM for a single motor. When the motor is connected to a gear box, it will run slower and the torque will be higher. Customers can choose the gear ratio according to their needs. The gear ratios available for gearboxes are: 2:1, 5:1, 10:1, 15:1, 20:1, 30:1, 36:1 , 50:1, 63:1, 67:1, 89:1, 100:1,...

view product

Efficient NEMA 17 hybr...

Description This is a NEMA 17 hybrid stepper motor with planetary gearbox 42mm hybrid gear reducer stepper motor. The 42mm hybrid stepper motor range can be equipped with a high performance gearbox, available in a variety of gear ratios and motor lengths ranging from 25mm to 60mm. Our gearboxes feature a high efficiency, high precision planetary gear configuration. Used in conjunction with a miniature stepper drive to reduce vibratio...

view product
High precision 35mm pl...

Description This is a high precision planetary gearbox stepper motor which is assembled from a range of 35mm (NEMA14) square hybrid stepper motors and cylindrical planetary gearboxes. Motor lengths for this product generally range from 32.4 to 56.7mm, and special lengths can be customised. The longer the length, the higher the torque of the motor. In addition, there are two options for the stepping angle of the motor. 0.9 degrees and ...

view product
12VDC high torque 35mm...

Description This motor is a 35mm diameter high torque decelerating stepping motor with a body height of 35.8mm. The output shaft of the motor can be customized to install gears and synchronous pulleys. After the stepping motor is equipped with a gearbox, the step angle is further subdivided to increase the load torque and control more accurately Conventional gear reduction ratios include 3.7, 3.82, 5.2, 5.36, 13.7, 14.62, 19.2, 20.51...

view product
12vDC geared stepper m...

Description This motor is a 25 mm diameter motor with a height of 25 mm. The basic step angle of the motor is 7.5 degrees. After the reducer decelerates, the step angle resolution can reach 0.075~0.75 degrees, which can achieve accurate position control and other functions. Product standard gear reduction ratio: 1:10 1:15 1:20 1:30 1:30 1:60 1:75 1:100 On the basis of matching reducer with stepping motor, the stepping motor adopts a...

view product
20mm diameter stepper ...

Description 20BY45-20GB is a 20BY45 permanent magnet stepper motor attached with a GB20 20mm diameter gearbox. The step angle of the single motor is 18°/step. With different gear ratio, it would have different output speed and torque performance. If customers want more torque, we suggest to user higher gear ratio. If customers want higher output speed, we suggest to keep gear ratio down. The length of gearbox is related to gear l...

view product
10-817G 10mm stepper m...

Description This is a 1024GB horizontal gearbox attached with a 10mm micro stepper motor. We have different gear ratio for option, from 10:1 to 1000:1. With higher gear ratio, motor’s output torque will be higher, and output speed will be slower. The choice of gear ratio depends on customers want more torque, or more speed. Here is calculation: Output torque=single motor’s torque*gear ratio* gearbox efficiency Output speed= sing...

view product
Micro Gear Stepper Mot...

Description The 25BYJ412 stepper motor is mainly used in printers, valves, fluid control, position control and other fields. This motor has the features of small size, high precision and high strength. This stepper motor has a built-in gearbox with a reduction ratio of 1:10. Finally, an output top rod with a stop structure is used so that the plunger can move back and forth without rotating. The thrust force can be up to 10 kg. JST PH...

view product
High precision 20mm pm...

Description This is a circular gearbox with a 20mm PM stepper motor. The resistance of the motor is selectable from 10Ω, 20Ω, and 31Ω. The gear ratios of the circular gearbox, the gear ratios are 10:1,16:1,20:1,30:1,35:1,39:1,50:1,66:1,87:1,102:1,153:1,169:1,210:1,243:1,297:1,350:1, The efficiency of circular gearbox is 58%-80%. The larger its ratio, the slower the output shaft rotation speed and the higher the torque. The customer e...

view product
15mm worm gear stepper...

Description This is a 15 mm stepper motor with a worm gearbox. There are 1 and 2 heads of worm gear, which can be understood as 1 and 2 teeth. The number of heads is selected according to the gear ratio, and the efficiency of worm gear is relatively low at 22%-27%. Customers can choose according to their choice of gearbox gear ratio. 21:1,42:1,118:1,236:1,302:1,399:1,515:1,603:1,798:1,1030:1. In addition to these gear ratios, customer...

view product
8mm mini PM stepper mo...

Description This 8mm diameter miniature stepping motor is combined with 8mm*10mm precision metal gearbox. The basic stepping angle of the motor is 18 degrees, i.e. 20 steps per revolution. With the deceleration effect of the gearbox, the final rotation angle resolution of the motor can reach 1.8~0.072 degrees, which can be used in many fields requiring precise control of the rotation position. We have 1:20 1:50 1:100 1:250 gear ratio...

view product
M3 screw shaft 2 phase...

Description This is a combination of a miniature stepper motor with a motor diameter of 10MM plus a precision metal gearbox. In addition, we have 6mm, 8mm, 10mm, 15mm and 20mm diameter motors for customers to choose from. The step angle of this motor is 18 degrees, i.e. 20 steps per revolution. With the deceleration effect of the gearbox, the final motor rotation angle resolution can reach 0.05~6 degrees, which can be used for a varie...

view product

10mm linear motor with...

Description The SM10 linear motor is a special linear motor from our company, a stepper motor with lead screw with anti-rotation bracket. A rotor with a nut, the lead screw advances or retreats as the rotor turns clockwise or counterclockwise. It converts the rotation of the motor into a linear motion by the relative movement of the inner rotor and the screw. The motor has a step angle of 18 degrees. The lead spacing is 1mm. The l...

view product
36mm micro linear step...

Video Description VSM36L-048S-0254-113.2 is a through shaft type stepping motor with guide screw. When the rotor operates clockwise or counterclockwise, the top of the screw rod needs to be fixed, and the guide screw will move forward or backward. The stepping angle of the stepping motor is 7.5 degrees, and the lead spacing is 1.22mm. When the stepper motor rotates for one step, t...

view product
25mm external drive li...

Description VSM25L-24S-6096-31-01 is an externally driven stepping motor with guide screw. When the rotor operates clockwise or counterclockwise, the lead screw will rotate in the mechanism, and the screw rod will not move up and down The stepping angle of the stepping motor is 15 degrees, and the lead spacing is 0.6096mm. When the stepping motor rotates for one step, the lead moves 0.0254mm. Motor screws can be customized as matchin...

view product
20mmPM micro linear st...

Video Description SM20-020L-LINEAR SERIAL is a stepping motor with guide screw. When the rotor operates clockwise or counterclockwise, the guide screw will move forward or backward. The stepping angle of the stepping motor is 7.5 degrees, and the lead spacing is 0.6096mm. When the stepping motor rotates for one step, the lead moves 0.0127mm This product is a patented product of the company. It converts the rotation of the motor into l...

view product
20mm diameter high pre...

Description This is a 20mm diameter permanent magnet stepper motor with brass slider. The brass slider is made from CNC and it has double linear bearing to provide strong support. The thrust of the slider is 1~1.2 KG(10~12N), and the thrust is related to motor’s lead screw’s pitch, driving voltage and driving frequency. A M3*0.5mm pitch lead screw is used on this motor. When driving voltage gets higher, and driving frequency gets lowe...

view product
18 degrees step angle ...

Description SM15-80L is a stepping motor with a diameter of 15mm. The screw pitch is M3P0.5mm, (Move 0.25mm in one step. If it needs to be smaller, subdivision drive can be used)， and the effective stroke of the screw is 80mm. The motor has a white POM slider. As it is a mold production, it can save costs. It can also customize the slider made of brass ...

view product
Micro slider screw ste...

Description VSM10198 micro stepping motor is widely used in cameras, optical instruments, lenses, precision medical devices, automatic door locks and other fields due to its small size, high accuracy, easy control and other excellent characteristics. The effective travel of the lead screw of the motor is 40mm, the lead screw is M2P0.4, the basic step ang...

view product
8mm 3.3VDC mini Slider...

Description VSM0806 is a linear micro stepping motor. The screw rod is M2P0.4mm, and the screw pitch of the output shaft is 0.4mm. The screw is rotated into thrust through the screw rod and the screw rod. The basic step angle of the motor is 18 degrees, and the motor runs 20 steps every week, so the displacement resolution can reach 0.02mm, achieving the goal of precision control....

view product
6mm micro Slider linea...

Description VSM0632 is a precision micro stepping motor. The screw pitch of the output shaft is M1.7P0.3mm, and the screw is rotated into thrust through the screw and screw support. The basic step angle of the motor is 18degrees, and the motor runs 40 steps every week, so the displacement resolution can reach 0.015mm, achieving the goal of precision control. Because of its small size, high precision, easy control and other excellent c...

view product

20 mm Micro stepper mo...

Description This permanent magnet stepper motor is 20mm in diameter, has a torque of 60gf.cm, and can reach a maximum speed of 3000rpm. This motor can also be added to the gearbox, the motor step angle is 18 degrees, that is, 20 steps per revolution. When the gearbox is added, the motor deceleration effect rotation angle resolution can reach 0.05~6 degrees. Applicable to many needs, precise control of the rotation position. The coil r...

view product
20mm permanent magnet ...

Description 20BY45-53, the motor diameter is 20mm, the motor height is 18.55mm, the ear mounting hole distance is 25mm, and the motor has a step angle of 18 degrees. Each part is made of precision molds. Therefore, compared with similar products, this product has the advantages of stable rotation, small positioning torque and high efficiency. The normal output shaft height of the motor is 9mm, and the motor outlet can be customized ac...

view product
15by micro steppr moto...

Description VSM1519 is a precision micro stepping motor. Its output uses M3 screw to perform linear movement and generate thrust, which can be directly used as an actuator to achieve the actions required by customers. The basic angle of the stepping motor is 18 degrees, and the motor runs 20 steps every week. Therefore, the displacement resolution can reach 0.025mm, so as to achie...

view product
10BY mini 5v 10mm diam...

Description VSM1070 is a miniature high-quality low-noise stepping motor. The motor diameter is 10mm, the motor height is 10mm, the motor ear mounting hole spacing is 14mm, and the output shaft height is 5.7mm. The motor output shaft height can be customized according to the customer's installation needs. The conventional motor output shaft is equipped with copper gears (gear modu...

view product
8mm Mini Micro Stepper...

Description A stepper motor is a motor that converts electrical pulse signals into corresponding angular displacement or linear displacement. They have multiple coils that are organized in groups called "phases". By energizing each phase in sequence, the motor will rotate, one step at a time. With a driver controlled stepping you can achieve very precise positioning and speed cont...

view product
low noise high quality...

Description VSM0613 is a micro stepping motor. The motor diameter is 6 mm, the height is 7 mm, the diameter of the output shaft is 1 mm, and the height of the conventional output shaft is 3.1 mm. The length of the output shaft can be customized according to the customer's installation needs. The motor output shaft is equipped with a conventional gear with a module of 0.2, a number...

view product
High Torque Micro 35m...

Description There are two winding methods for stepper motors: bipolar and unipolar. 1.Bipolar Motors Our bipolar motors generally have only two phases, phase A and phase B, and each phase has two outgoing wires, which are separate winding. There is no connection between the two phases. Bipolar motors have 4 outgoing wires. 2.Unipolar motors Our unipolar motors generally have four phases. On the basis of two phases of bipolar motors, t...

view product

Planetary gearbox step...

Description This is a planetary gearbox stepper motor 35mm (NEMA 14) square hybrid stepper motor. The motor length for this product is generally between 27 and 42mm, special lengths can be customised. The longer the length, the higher the torque of the motor. Hybrid stepper motors are generally square in shape and stepper motors can be identified by their distinctive external shape. In addition, there are two options for the stepping ...

view product
NEMA34 86mm linear hyb...

Description NEMA 34 hybrid stepper motor has 86mm size. It’s also external drive linear stepper motor with 135mm length lead screw shaft on top, also with a plastic nut/slide fits it. The lead screw Model No. is: Tr15.875*P3.175*4N The pitch of lead screw is 3.17mm, and it has 4 starts, so lead = start number*lead screw pitch=4 * 3.175mm=12.7mm So the step length of the motor is: 12.7mm/200steps=0.0635mm/step We also have other lead s...

view product
NEMA11 28mm linear hyb...

Description This is NEMA11 (28mm size) hybrid stepper motor with 1.8° step angle. No like regular shaft, this is a run-through stepper motor with lead screw in the middle. The lead screw Model No. is: Tr4.77*P1.27*1N The pitch of lead screw is 1.27mm, and it has single start, so lead is 1.27mm, as its pitch. So the step length of the motor is: 1.27mm/200 steps=0.00635mm/step, step length means the linear movement, when the motor takes...

view product
20mm NEMA8 linear hybr...

Description This is NEMA8 (20mm size) hybrid stepper motor with a run-through shaft, as called as non-captive shaft. Not like stepper motor with round shaft/D shaft, this run-through shaft is free to move upward and downward while spinning at the same this. This is know as linear stepper motor, which can do linear movement. The linear moving speed is determined by driving frequency and lead screw’s lead. There is a manual nut on the b...

view product
High torque NEMA 23 hy...

Description This is a NEMA 23 57mm diameter hybrid stepper motor. The step angle has 1.8 degree and 0.9 degree for customers to choose. Motor heights are 41mm,51mm,56mm,76mm,100mm,112mm, The weight and torque of the motor is related to its height. The standard output shaft of the motor is the D-shaft, which can also be replaced with a trapezoidal lead screw shaft. Customers choose the parameters below according to their needs. Please ...

view product
High Precision 42mm st...

Description This is a NEMA 17 42mm diameter hybrid stepper motor. We have: 20mm, 28mm, 35mm, 39mm, 57mm, 60mm, 86mm, 110mm, 130mm in addition to 42mm diameter, these motors can be matched with gearboxes. Motor height: 25mm, 28mm, 34mm, 40mm, 48mm, 60mm, the higher the motor height, the higher the torque, customers choose according to their needs. Application areas are also wide, such as: robots, industrial electronic automation equi...

view product
NEMA8 20mm hybrid step...

Description This NEMA8 motor is a 20 mm size hybrid stepper motor. This motor is a high-precision, small-size hybrid stepping motor with beautiful appearance and excellent performance. The step angle is 1.8°, which means it takes 200 steps to make one revolution. Motor lengths are 30mm, 38mm and 42mm, the longer the motor length, the higher the torque. The 42mm has more torque while the 30mm has a smaller size. Customers can choose th...

view product
NEMA 6 high precision ...

Description This NEMA6 motor is a hybrid stepper motor with a relatively small diameter of 14mm. This motor is a high precision, small size hybrid stepper motor with good looks and excellent performance. This stepper motor can be precisely controlled and programmed even without a closed loop encoder/no feedback system. The NEMA 6 stepper motor has a step angle of only 1.8°, which means it takes 200 steps to complete one revolution. Th...

view product
28mm size NEMA11 hybri...

Description This is 28mm size(NEMA 11) Hybrid stepper motor with D output shaft. The step angle is regular 1.8°/step. We have different height for you to choose, from 32mm to 51mm. With bigger height, motor with have higher torque, and the price is also higher. It depends on customer’s required torque and space, to decide which height is the most suitable. In general, the motors we produce the most are bipolar motors(4 wires), we also...

view product

Low-noise 50 mm diamet...

Description 50BYJ46 is a 50 mm diameter permanent magnet motor with gears, low noise permanent magnet stepper motor for saliva analyzer The motor has a gearbox gear ratio of 33.3:1, 43:1, 60:1 and 99:1, which can be selected by customers according to their requirements. The motor is suitable for 12V DC drive, low noise, cheap and reliable performance, it has been widely used in various industry fields, and it is continuously produced ...

view product
35BYJ46 permanent magn...

Description The 35BYJ46 is a 35 mm diameter permanent magnet motor with gears. The motor has a gear ratio of 1/85 and is our standard single pole 4 phase stepper motor with an 85 gear ratio gearbox on top, so the step angle is 7.5°/85. Gearbox gear ratios of 25:1, 30:1, 41.6:1, 43.75:1 are also available for customers to choose from. The motor is suitable for 12V DC drive. 24V voltage is also available. This stepper motor has been wid...

view product
Customizable 30mm perm...

Description The 30BYJ46 is a 30 mm permanent magnet geared stepper motor. The gear ratio of the gear box is 85:1 Stepping angle: 7.5° / 85.25 Rated voltage: 5VDC; 12VDC; 24VDC Drive mode. 1-2 phase excitation or 2-2 phase excitation can be 1-2 phase or 2-2 phase excitation according to your needs. Lead wire sizes are UL1061 26AWG or UL2464 26AWG for your choice. This motor is common in all application industries because of its cheap p...

view product
28mm permanent magnet ...

Description This is a pm reduction stepper motor with a diameter of 28mm,Out put gear with friction clutch The gear ratio of this motor is 16:1, 25:1, 32:1, 48.8:1, 64:1, 85:1. The motor has a step angle of 5.625°/64 and is driven by 1-2 phase excitation or 2-2 phase excitation. Rated voltage: 5VDC; 12VDC; 24VDC motor connection wire and connector wire specifications UL1061 26AWG or UL2464 26AWG, the The motor is mainly used in sanita...

view product
2-phase 4-wire Permane...

Description This motor is a 25mm diameter motor with a thickness of 16mm. The diameter of the motor's output shaft is 2mm. The length can be customized according to the customer's needs. The motor's output shaft can be customized to install the screw rod and gear, D-axis, double flat shaft, etc., which can be customized according to the customer's installation needs For the installation of motor, the mounting plate with ears can also ...

view product
24mm permanent magnet ...

Video Description The 24BYJ48 is a 24 mm permanent magnet stepper motor with a gearbox on top. The gearbox has gear ratios of 16:1,25:1,32:1,48.8:1,64:1,85:1 for you to choose from, depending on your speed and torque requirements. The voltage of the motor is 5V~12V, and the motor can be excited by 1-2 phase or 2-2 phase according to your needs. The conductor gauge is UL1061 26AWG or UL2464 26A...

view product

24V~36V Underwater mot...

Description SW4025 underwater brushless motor is rated at 24~36 V DC, specially designed for underwater drones/robots. This model has no propeller, users can design their own propeller and fix it with screws. This is ordinary brushless motor, it can be driven by any ordinary drone ESC controller or ordinary brushless motor controller. Beautiful shape, long life, low noise technology, high energy saving rate, high torque and high precision. It is widely use...

view product
SW2820 ROV thruster 24...

Description SW2820 underwater brushless motor voltage is 24V-36V, also model submarine underwater motor, motor diameter is 35.5mm, small volume, beautiful appearance, long life, low noise technology, high energy saving rate, high torque, high precision. It has 200~300KV value, and the KV value is related to the coil winding parameters. The thrust force is about 3kg and the control speed is 7200RPM. It has a wide range of applications in precision electroni...

view product
28mm underwater motor ...

Description Model 2210B underwater motor adopts electronic switching device to replace the traditional contact commutator and brush for electronic commutation. Therefore, it has the advantages of high efficiency, high reliability, no commutation sparks and no interference, low mechanical noise and high lifetime. This is a short shaft underwater motor, and we also have a long shaft one. This motor comes with a propeller with 3 cables (...

view product
12V-24V DC ROV Thruste...

Description SW2216 ROV thruster 12V-24V underwater equipment brushless DC motor for model submarine underwater motor with beautiful appearance, small size, long life, low noise technology, high energy saving rate, high torque and high precision. The motor diameter is 28mm,total length is 40mm. The thrust is about 1.5kg. KV value is 500-560KV, It has a wide range of applications in precision electronic equipment, automation equipment, ...

view product
Underwater motor water...

Description The 2210A underwater motor adopts electronic switching device to replace the traditional contact commutator and brushes for electronic commutation. Therefore, it has the advantages of high efficiency, high reliability, no commutation sparks and no interference, low mechanical noise and high lifetime. The motor has a maximum thrust of 1 kg and can handle seawater up to 100 meters deep. It has a propeller, three wires and a ...

view product

BLOG

Share news and deliver value in the field of micromotors.

Will stepper motor blocking burn the motor?

Stepper motors can be damaged or even burned due to overheating if they are blocked for a long period of time, so stepper motor blocking should be avoided as much as possible. Stepper motor stalling can be caused by excessive mechanica...
What are the advantages, disadvantages and scope of application of stepper motors

A stepper motor is an electric motor that converts electrical energy into mechanical energy, and its output torque and speed can be precisely controlled by controlling the power supply. I, the advantages of stepper motor ...
Stepper motors in industrial robots

一、industrial robots have become an important part of the modern industrial production line. With the arrival of the industry 4.0 era, industrial robots have become an important part of the modern industrial production line. As the core drive device of industrial robot...

INTRODUCTION

Send your message to us: